Product Details:
Minimum Order Quantity | 1 Piece |
Material | PVC |
Pressure | Medium Pressure, High Pressure |
Color | Black |
Media | Air, Water |
Product Details:
Minimum Order Quantity | 1 Unit |
Automation Grade | Automatic |
Capacity Inlet Flow Rate (cubic meter/hour) | 500 - 20000 LPH |
Water Source | Borewell Water |
Inlet TDS (mg/l) | 150- 5000 TDS |
Material of Construction | Stainless steel |
Material for Construction | Stainless steel |
Brand | DPL |
Product Details:
Minimum Order Quantity | 1 Unit |
Plant Application | Domestic RO Plant |
Automatic Grade | Automatic |
RO Capacity (Liter/hour) | 0-200 (Liter/hour) |
Chiller Cooling Capacity (Tons) | 2 ton |
Brand/Make | DPL |
Number of Membranes in RO | 4 |
Material of Construction | Stainless Steel |
Plant Accessories | Ultra Filtration Plant |
Max Water Recovery Rate | >75 % |
Number of Filtration Passes | 3 |
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Silver |
Material | Stainless Steel |
Surface Treatment | Galvanized |
Finishing | Chrome Plated |
We offers 8 Inch & 4” stainless steel 304 or 316L membrane housings.
These membrane housings are widely used for covering reverse osmosis membrane, ultra filtration and nano filtration membrane.
Features:
(1) RO membrane housing has available length, 1, 2, 3, 4, 5, 6, element
(2) membrane housing tube is seamless
(3) Tube material: Stainless steel 304 or 316L
(4) Wall Thickness: 1.5-3mm
(5) Material of lid is Stainless steel with Silicon rubber O-Ring
(6) Inlet/Outlet port: End port or Side Port
(7) Surface finishing: Mechanical polishing or Electro-polished
(8) Pressure resistance: 3MPa
(9) Temperature-resistance: 0 to 150 degrees Centigrade
(10) 300PSI-1000PSI
Product Details:
Minimum Order Quantity | 1 Piece |
Form | Liquid |
Usage | Industrial, Commerical |
Packaging Type | Can |
Grade Standard | Technical Grade |
The hardness salts of calcium & magnesium are likely to be precipitated if concentration exceeds its solubility limit & it may faults the membranes resulting into scaling which ultimately leads to poor treated water quality from R.O. System. To prevent this an Anti Scalent dosing (scale inhibitor) system is provided. Normally a scale inhabitator is dosed in feed water. Dosage rate is 4-5 mg/liter. A HDPE chemical preparation tank with an electronics diaphragm type dosing pump is provided for this.